| 1. |
Does it appear that you are missing the Horse's
Head? Please check inside the body cavity as the head was placed inside the body
for shipping purposes. |
| 2. |
Assemble the head to the body last (after horse
is mounted to base). |
| 3. |
Use a socket wrench for the base assembly. |
| 4. |
Refer to packaging or instruction sheet illustrations
for the orientation of the base. |
| 5. |
To assemble foot caps: start by pushing on with
hand, then use a hammer or rubber mallet to secure. |
| 6. |
Use liquid soap, if necessary, to lubricate the
tubes passing through the horse body. |
| 7. |
The horse's legs are numbered, and correspond to
the numbers on the body. |
| 8. |
To position the spring covers, apply a twisting
motion while pushing the covers into place. |
| 9. |
The collar is labeled "front" for correct orientation. |
| 10. |
The threaded rods for the collar and head assembly
are numbered "1" & "2", and the longer rod, or rod #1 is assembled to the front. |
| 11. |
Do not over tighten the gold colored nuts on the
collar. |
| 12. |
Make sure all hardware is tightened, and springs
and spring covers are securely in place before the child rides the Liberty Spring
Horse. |
| Thank you for purchasing
the Model 300 Liberty Spring Horse! |
